No products in the cart.
Micro registration attachment for line table screen printing – 2 pcs
$15.00
Simple but accurate and solid micro registration
Out of stock
Description
- Attachment for regular screen frames to be used on the Line Table Screen Printing Press
- Accurate micro control of the screen frame movements
- Once registration is set, it will not change (No need to re-register!)
- Can be used for wooden or aluminum frames
- 1″ x 15″
- 1/8″ thick steel
- 2 pcs for 2 frames (Frames NOT included)
- Shipped from California via UPS Ground
Additional information
| Weight | 1.8 lbs |
|---|---|
| Dimensions | 18.0 × 4.0 × 4.0 in |
| Brand name | JOORHEE |
FAQ
Micro Registration Attachment
This is a screen frame attachment to control micro adjustments of the frame to register multi color screens.
Yes, it can be used with Aluminum or wooden frames. It can also be used with retensionable frames as long as they have flat frame side.
As many as your frames. This attachment stays with the frame(design) all the time so that whenever you have to use that frame it's ALREADY REGISTERED. Even though you can transfer it to another frame, we do not recommend that.
Yes, you can clamp the other side of the screen on the rotary press. In this case, the design will be turned too, of course. But if your rotary press has side clamps, you can use the same design both on the line table press and the rotary press.
Yes, you can. For wooden frames, simply unscrew it. For aluminum frames, grind off rivet heads with angle grinder.
